Product
OPTICAL RECEIVER



product description:

GSOR-1LR (LS) optical receiver PIN photoelectric conversion tube imports, with the low-noise amplifier tubes and imported original GaAs module, the noise and nonlinear distortion characteristics very excellent link indicator light degradation is minimal.


Features:

1290nm ~ 1600nm operating wavelength;

Backplane bandwidth of 1.2GHz;

Efficient switching power supply. Power input AC220V;

Nice indoor enclosure, with excellent electromagnetic shielding performance;

Optical AGC function, the input optical power -7 ~ + when 2dBm, the output level constant;

Low optical power receiving input optical power to ensure the machine performance when -5dBm;

LED display shows the current input optical power;

Each port has lightning and surge voltage protection;

With a variety of output types, optional independent, bridges and distribution output;

Adjustable attenuator, balanced, easy debugging;


Technical Parameters:

project

unit

Performance parameters

Operating wavelength

nm

1290-1600

Input optical power range

dBm

-7—+2

Optical Return Loss

dB

≥50

Optical Connector Style

 

FC/APC

Frequency Range

MHz

85-862(1003)

Link C / N

dB

≥51

Note 1

Link C / CTB

dB

≥66

Link C/CSO

dB

≥65

flatness

dB

±0.75

RF output level

dBuv

≥104

Deviation detection port

dB

±1.0

Band rejection

dB

≥50

RF output return loss

dB

≥16(47-862)MHz,≥14(862-1003)MHz


Note 1: The light receiving power -1dBm, configuration 59 PAL-D analog TV channel signal within the frequency range of 550MHz, transmit digital modulated signal within 550MHz-862MHz frequency range, the level of the digital modulation signal (within 8MHz bandwidth) than the analog signal the carrier level low 10dB, the output level is 106dB, 6dB tilt.

Ordering Guide:

GSOR-1LR(LS)

0

0

GSD BAN optical receiver model

8: 862 MHz Bandwidth
1: 1GHz Bandwidth

FC:FC/AP
CSC:SC/APC

Precautions:
1, the input optical power range -7dBm ~ + optical AGC range is 2 dBm optical receiver optical input power can cause different C / N of the change. If the optical power is too high, it will damage the light-receiving PIN diode or cause greater distortion. If the optical input power is too small, it will make the C / N was significantly deteriorated. -1dBm Optical power input, CN≥51dB; -5dBm optical power input, CN≥48dB; -7dBm optical power input, CN≥46dB.
2, recommended that the input optical power of not less than -5dBm!